Yabby Edge LoRaWAN Downlink Encoder

Downlink Port 1: Set Trip Parameters Downlink sequence number
(Range = 1 to 127) Enable higher precision thresholds (Default = unchecked) Max heartbeat time between fix attempts out of trip
days hours minutes (Range = 1 minute to 5 days, 7 hours; Disable Heartbeat = 0; Default = 24 hours) (Time > 2 hours are rounded to the nearest 1 hour) Trip end timeout, without accelerometer detecting movement
minutes seconds (Range = 10 seconds to 42 minutes, 30 seconds; Disable trip tracking = 0; Default = 5 minutes) Time between fix attempts in-trip during work hours
minutes seconds (Range = 1 second to 120 minutes; Disable = 0; Default = 10 minutes) Time between fix attempts in-trip after work hours
minutes seconds (Range = 1 second to 120 minutes; Disable = 0; Default = 10 minutes) Fix on start of trips during work hours (Default = checked) Fix on start of trips during work hours (Default = checked) Fix on start of trips after work hours (Default = checked) Fix on start of trips after work hours (Default = checked) Accelerometer sampling rate:
Hz (Default = 10 Hz) Accelerometer wakeup threshold
mG (Default = 96 mG) Accelerometer wakeup count
ms (Default = 100 mS) Random Tx delay
minutes seconds (Range = 1 second to 120 minutes; Disable = 0; Default = 8 seconds) Disable wakeup filtering during work hours (Default = unchecked) Disable wakeup filtering after hours (Default = unchecked) Downlink String:

Downlink Port 2: Set After-Hours 1 Downlink sequence number
(Range = 1 to 127) Monday After Hours
Start of after-hours period on Monday
hours minutes (Range = 0 to 23 hours, 52.5 mins; Disable After hours = 0; Default = 0) (Time is processed in 7.5 min intervals) End of after-hours period on Monday
hours minutes (Range = 0 to 23 hours, 52.5 mins; Disable After hours = 0; Default = 0) (Time is processed in 7.5 min intervals) Tuesday After Hours
Start of after-hours period on Tuesday
hours minutes (Range = 0 to 23 hours, 52.5 mins; Disable After hours = 0; Default = 0) (Time is processed in 7.5 min intervals) End of after-hours period on Tuesday
hours minutes (Range = 0 to 23 hours, 52.5 mins; Disable After hours = 0; Default = 0) (Time is processed in 7.5 min intervals) Wednesday After Hours
Start of after-hours period on Wednesday
hours minutes (Range = 0 to 23 hours, 52.5 mins; Disable After hours = 0; Default = 0) (Time is processed in 7.5 min intervals) End of after-hours period on Wednesday
hours minutes (Range = 0 to 23 hours, 52.5 mins; Disable After hours = 0; Default = 0) (Time is processed in 7.5 min intervals) Thursday After Hours
Start of after-hours period on Thursday
hours minutes (Range = 0 to 23 hours, 52.5 mins; Disable After hours = 0; Default = 0) (Time is processed in 7.5 min intervals) End of after-hours period on Thursday
hours minutes (Range = 0 to 23 hours, 52.5 mins; Disable After hours = 0; Default = 0) (Time is processed in 7.5 min intervals) Downlink String:

Downlink Port 3: Set After-Hours 2 Downlink sequence number
(Range = 1 to 127) Friday After Hours
Start of after-hours period on Friday
hours minutes (Range = 0 to 23 hours, 52.5 mins; Disable After hours = 0; Default = 0) (Time is processed in 7.5 min intervals) End of after-hours period on Friday
hours minutes (Range = 0 to 23 hours, 52.5 mins; Disable After hours = 0; Default = 0) (Time is processed in 7.5 min intervals) Saturday After Hours
Start of after-hours period on Saturday
hours minutes (Range = 0 to 23 hours, 52.5 mins; Disable After hours = 0; Default = 0) (Time is processed in 7.5 min intervals) End of after-hours period on Saturday
hours minutes (Range = 0 to 23 hours, 52.5 mins; Disable After hours = 0; Default = 0) (Time is processed in 7.5 min intervals) Sunday After Hours
Start of after-hours period on Sunday
hours minutes (Range = 0 to 23 hours, 52.5 mins; Disable After hours = 0; Default = 0) (Time is processed in 7.5 min intervals) End of after-hours period on Sunday
hours minutes (Range = 0 to 23 hours, 52.5 mins; Disable After hours = 0; Default = 0) (Time is processed in 7.5 min intervals) Downlink String:

Downlink Port 4: Set Time Zone Downlink sequence number
(Range = 1 to 127) Offset of normal time zone from UTC
hours minutes (Default = 00H00) Daylight saving time shift
hours minutes (Default = 00H00) Start of Daylight Savings Time
Choose between ‘2nd Sunday of October’ style or Absolute Date for ‘1st of October’ style

Week of the month: + Day of the Week:

- - - OR - - -

Absolute Date:

Month: Offset of normal time zone from UTC hours minutes (Default = 00H00)
End of Daylight Savings Time
Choose between ‘2nd Sunday of October’ style or Absolute Date for ‘1st of October’ style

Week of the month: + Day of the Week:

- - - OR - - -

Absolute Date:

Month: Offset of normal time zone from UTC hours minutes (Default = 00H00)
Downlink String:

Downlink Port 5: Set Scheduled Upload Parameters Downlink sequence number
(Range = 1 to 127) Number of fix attempts:
(Retrys occur when the join failed and the uplinks are still unconfirmed) Local time* of scheduled upload time #1
hours minutes (Default = 00H00) Local time* of scheduled upload time #2
hours minutes (Default = 00H00) Local time* of scheduled upload time #3
hours minutes (Default = 00H00) Local time* of scheduled upload time #4
hours minutes (Default = 00H00) Local time* of scheduled upload time #5
hours minutes (Default = 00H00) Local time* of scheduled upload time #6
hours minutes (Default = 00H00) Local time* of scheduled upload time #7
hours minutes (Default = 00H00) Local time* of scheduled upload time #8
hours minutes (Default = 00H00) Local time* of scheduled upload time #9
hours minutes (Default = 00H00) Local time* of scheduled upload time #10
hours minutes (Default = 00H00) *Local time takes time zone and daylight savings offset into account (configurable in Downlink 4). Downlink String:

Downlink Port 6: Set Scheduled Upload Parameters (continued) Downlink sequence number
(Range = 1 to 127) Local time* of scheduled upload time #11
hours minutes Local time* of scheduled upload time #12
hours minutes *Local time takes time zone and daylight savings offset into account (configurable in Downlink 4). Downlink String:

Downlink Port 7: Set LoRaWAN Channels Downlink sequence number
(Range = 1 to 127) Minimum data rate to use when ADR is disabled (DR0)
(Default = 0) Maximum data rate to use when ADR is disabled (DR2)
(Default = 2) Uplink channel mask, set bits are enabled channels
(Hexadecimal Length = 9 bytes; Default = Leave blank for region-specific defaults) Downlink String:

Downlink Port 8: Set LoRaWAN Join / App EUI Downlink sequence number
(Range = 1 to 127) Set JoinEUI
JoinEUI to be Configured
(Default = 70B3D57050000004) Downlink String:

Downlink Port 9: Set Advanced LoRaWAN Options Downlink sequence number
(Range = 1 to 127) Days between network joins
(Range = 0 to 7; Disable = 0; Default = 7) ADR support
(Default = Never) Initial frame repetitions
NbTrans/Reps (Range = 1 to 15; Default = 1 NbTrans/Reps) Initial MaxCount0
s Sets uplinks between Rejoin0 attempts in LoRaWAN 1.1 OTAA, uplink interval equals "2^(4+MaxCount0)" seconds (Range = 1 to 15; Default = 15) Initial MaxTime0
s Sets approx. time between Rejoin0 attempts in LoRaWAN 1.1 OTAA, uplink period equals "2^(10+MaxTime0)" seconds (Range = 1 to 15; Default = 15) Initial AdrAckLimitExp
s Sets uplinks between ADR confirmation requests, uplink interval equals "2^AdrAckLimitExp" seconds (Range = 0 to 7; Default = 6, i.e. limit is 64) Initial AdrAckDelayExp
s Sets uplinks between ADR backoff steps, uplink interval equals "2^AdrAckDelayExp" seconds (Range = 0 to 7; Default = 5, i.e. limit is 32) Maximum Tx power limit
s (Range = -128 to 127 dBm EIRP; Maximum dBm = 127; Default = 127) Downlink String:

Downlink Port 10: Reset ABP Session Counters Downlink sequence number
(Range = 1 to 127) Reset FCnts every power cycle when using ABP on LoRaWAN 1.0 (Default = Do not reset) Downlink String:

Downlink Port 11: Set Position Scanning Parameters Downlink sequence number
(Range = 1 to 127) Do not require timestamp for autonomous GPS (Default = unchecked) Disable uplink fragmentation (disabling simplifies uplink decoding but limits how much scan data can be transmitted) (Default = unchecked) Maximum number of bytes to send in position update payload.
(Range = 9 to 282; Default = 282) Minimum number of WiFi access points to send when transmitting WiFi scan data
(Range = 1 to 31; Default = 2) Maximum number of WiFi access points to send when transmitting WiFi scan data
(Range = 1 to 31; Default = 7) Send order of scanned position data
     (Default = GNSS then WiFi) Scan order for acquiring position data
     (Default = GNSS then WiFi) GNSS (satellites) / WiFi (AP count) margin to trigger fallback position scan
(Range = 1 to 31; Default = 3) Maximum number of scanned satellites to save. (Range = 6 to 31) (default 12)
(Range = 6 to 31; Default = 12) Maximum number of WiFi access points to save.
(Range = 1 to 31; Default = 21) WiFi channel scan timeout.
(Range = 105 to 2047 ms; Recommended = 105 to 315 ms; Default = 210) Do not use GNSS aiding data even if available (Default = unchecked) Filter out short lived WiFi MAC addresses from scan (Default = unchecked) Filter out non-global WiFi MAC addresses from scan (Default = checked) Filter out WiFi MAC addresses that may be guest access points from scan (Default = checked) GNSS scan effort
     (Default = Best effort)       Downlink String:

Downlink Port 12: Set Uplink Fragmentation Parameters Downlink sequence number
(Range = 1 to 127) Minimum number of frames to send per encapsulated uplink
(Range = 1 to 128; Default = 1) Minimum percentage of packet loss to tolerate when fragmenting
(Range = 0% to 75%; Default = 20%) Maximum number of bytes to transmit in a single position uplink frame
(Range = 11 to 255; Default = 222) Downlink String:

Downlink Port 13: Set Downlink MTU Parameters Downlink sequence number
(Range = 1 to 127) Percentage to reduce maximum downlink size
(Range = 0% to 100%; Default = 0%) Bytes to further reduce maximum downlink size
(Range = 0 to 255; Default = 0) Maximum downlink size, applied after reductions
(Range = 11 to 255; Disable = 0; Default = 0) Downlink String:

Downlink Port 14: Set Almanac Management Parameters Downlink sequence number
(Range = 1 to 127) Minimum almanac age before new download begins
(Range = 3 to 87 days; Default = 21 days) Maximum random delay to add after almanac expiry
days hours (Range = 12 hours to 60 days; Default = 14 days) Nominal time between almanac requests
days hours minutes (Range = Range = 5 minutes to 45 days; Default = 12 hours) Base time between almanac request retries
hours minutes (Range = 5 minutes to 4 hours, 15 minutes; Default = 1 hour) Maximum number of downlink opportunities between almanac request retries
(Range = 1 to 255 attempts; Default = 3 attempts) Time between failsafe connection checks
(Range = 1 to 255 days; Default = 28 days) Base time between aiding requests:
(Range = 2 minutes to 48 days; Default = 6 days) Time request back-off when out of coverage
(Range = 5 minutes to 6 days; Default = 2.5 hours) Downlink String:

Downlink Port 15: Set Battery Statistics Parameters Downlink sequence number
(Range = 1 to 127) Battery type is alkaline (Default = unchecked) Time between statistics uplinks
months days hours (Range = 1 hour to 3 months, 30 days and 23 hours; Default = 4 days) Battery capacity used by network server (DevStatusReq) and self-discharge calculations
(Range = 0 to 65535 mAh; default = 1100 mAh) Battery percentage discharge per year
(Range = 0 to 25.5%; Default = 3%) Downlink String:

Downlink Port 16: Set Inactivity Indicator Parameters Downlink sequence number
(Range = 1 to 127) Fix on set
     (Default = No fix) Clear on set
     (Default = No fix) Inactivity timeout
days hours minutes (Range = 10 minutes to 63 days, 12 hours; Default = 1 hour; Disable = 0) Inactivity beacon period (‘heartbeat’) when Inactivity timeout has elapsed (if enabled, overrides default ‘heartbeat’. Optional, supported from firmware v1.5 onwards )
days hours minutes (Range = 1 minute to 5 days; Disable = 0; Default = 0)       Downlink String: